PRODUCT WARNINGS
- It is not an official manufacturer product.
- Due to third party and variable quality control of lenses, some lenses may not work with this mount ring as intended. Proceed with caution.
- Lenses with rear elements that protrudes beyond its mount metal flange are not advisable to be mounted.
- If you encounter great resistance during mounting or scratching sounds, do not proceed further. Dismount lens and check for any damage.
- Always follow the stated mounting method as described in this manual for each lens mount to prevent damage to equipment.
- It is not advisable to mount heavy lenses (>800g) of other mounts except K mount.
- Do not mount adapted mount lenses for extended period of time, especially during non-usage as it will cause loosen mount of K mount lenses. In cases where this has already happened, the remedial action is described here (Remedial action for Loosened K mount lens mounting).
- During daily storage or long periods of travelling, a K mount body cap should be used instead. The white push-on body mount cover in below link is recommended. http://www.us.ricoh-imaging.com/accessories/Body_Mount_Cover.
- Lens with guard at rear of mount extending more than 9mm cannot be mounted due to mirror box ( refer to diagram below).
- Due to third party and variable quality control of lenses, some lenses may not work with this mount ring as intended. Proceed with caution.
- Lenses with rear elements that protrudes beyond its mount metal flange are not advisable to be mounted.
- If you encounter great resistance during mounting or scratching sounds, do not proceed further. Dismount lens and check for any damage.
- Always follow the stated mounting method as described in this manual for each lens mount to prevent damage to equipment.
- It is not advisable to mount heavy lenses (>800g) of other mounts except K mount.
- Do not mount adapted mount lenses for extended period of time, especially during non-usage as it will cause loosen mount of K mount lenses. In cases where this has already happened, the remedial action is described here (Remedial action for Loosened K mount lens mounting).
- During daily storage or long periods of travelling, a K mount body cap should be used instead. The white push-on body mount cover in below link is recommended. http://www.us.ricoh-imaging.com/accessories/Body_Mount_Cover.
- Lens with guard at rear of mount extending more than 9mm cannot be mounted due to mirror box ( refer to diagram below).
For Weather Resistant version:
- Weather resistance is reduced at mount area. Do not install this product if weather resistance is required.
- Removal of original Pentax mount ring will be tight due to the weather sealing O-ring at the sides of the ring. Remove with caution.
- Weather resistance is reduced at mount area. Do not install this product if weather resistance is required.
- Removal of original Pentax mount ring will be tight due to the weather sealing O-ring at the sides of the ring. Remove with caution.
